Fix: Windows 11 No Device Drivers Were Found [2021]

Everyone seems to be in a rush to install Windows 11, because of its numerous upgraded facilities. Certainly, if you are upgrading from the Settings, you don’t have to face many complications. But you try to install it using a USB by creating an ISO image, the installation gets stuck because the OS is unable to locate driver files. So here, I will be teaching solutions to Fix Windows 11 No Device Drivers Were Found. You can head to the following section to learn about ways to fix this issue.

How Do I Fix Windows 11 No Device Drivers Were Found?

No matter if you have created a bootable USB drive containing ISO image file using Media Creation Tool or Rufus, you will get interrupted during Windows 11 installation. Unless you are not annoyed by the “No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK” popup. So if you wish to install Windows 11 with full device drivers, read the drafted workarounds.

1. Prefer USB 2.0

Most users prefer to use the USB 3.0 port, especially while running the ISO image files to install Windows 11. As occasionally, your system is unable to collect data from the devices connected to this port. In that case, you should prefer to connect your bootable USB drive with port 2.0. So that you don’t have to face any compatibility issues.

2. Separate USB for Drivers

Sometimes the Windows 11 InstallShield is unable to separate the device drivers from the ISO image files. Resulting in, it starts to deliver errors like Windows 11 No Device Drivers Were Found. it would be a better option to connect a separate USB drive that only contains the files of device drivers.

  • Create a bootable USB drive using third-party programs like Rufus.
  • Depending upon your processor, download the device drivers. (Intel | AMD)
  • Transfer the downloaded drivers into the USB drive.
  • Start the Windows 11 Installation and wait until you get the “No device drivers were found” error.
  • On the appearing popup, click on the Ok button and connect the separate USB device with drivers.Windows 11 No Device Drivers Were Found
  • Click on the Browse button and select the USB drive that contains the drivers.
  • Now Windows InstallShield will be able to locate the missing device drivers.

3. Select Active Partition

Windows OS can be unaware of the active partition, so it could start to deliver errors, whenever it’s unable to locate the path, where it should install the device drivers. And if it isn’t locating the partition automatically, you need to show the operating system the actual path to benefit from the Active Partition.

  • Connect the Primary USB device with your computer with the ISO image file and restart your system.
  • On the Choose an Option, navigate to Troubleshoot >> Command Prompt.No Device Drivers Were Found During Windows 11 Installation
  • Run the following commands one-by-one:
    • diskpart
    • list disk
    • select disk X
    • list partition
    • select partition X
  • Once the commands are executed, run the “active” command.
  • Close the command prompt and proceed in installing Windows 11.

4. Turn On XHCI Hand-off

XHCI Hand-off controls the rights of the USB 3.0 port. If it is disabled, its control is within the hand of BIOS. But once you have enabled it, USB 3.0 functionalities are controlled by your operating system. In simple words, enabling such a facility will help your system locate the stored files from your USB device.

  • Restart your PC and while it’s booting, press the Esc key to get the startup menu.
  • Hit the F10 key from your keyboard to navigate to BIOS settings.
  • Go to the Advanced tab.
  • Under USB Configuration, enable the XHCI hand-off facility.Enable XHCI Hand-off
  • Save the implied tweaks and reboot your computer.

5. Turn Off Secure Boot

The main purpose of Secure Boot is to help users protect their computers from untrusted drivers and malware. It scans every file that runs during boot and stops the actions that might harm your system. But in some cases, it also delivers false alarms, resulting in, users being unable to boot Windows 11 installation.

  • Reboot your PC and press the Esc key.
  • Press the F10 key to enter the BIOS settings.
  • Navigate to the Security tab.
  • Change the Secure Boot status to Disabled.Disable Secure Boot
  • After restarting your computer, confirm your action on the Secure Boot prompt.

6. Perform a Clean Install

Some file corruptions stop you from upgrading to Windows 11. In that case, you should perform a clean installation by removing all the files present in that Windows OS drive. That’ll also help InstallShield in adding the required files from scratch and uploading all the required resources to run Windows 11 smoothly.

  • Boot into Windows 11 InstallShield and from the Blue Screen, navigate to Troubleshoot >> Command Prompt.
  • Run the following commands:
    • diskpart
    • list disk
  • To select a drive where you wish to install Windows 11:
    • select disk CInstall Windows 11
  • To clear all files from the selected disk:
    • clean
  • After formating the default driver, install Windows 11 from the beginning.

That’s all, thanks for visiting WebsiteforWeb to Fix Windows 11 No Device Drivers Were Found.

ishaq
A content writer by profession whose expertise resides in providing workarounds to help Windows and Linux users make the most out of their preferred operating systems.

Leave a Reply

Your email address will not be published. Required fields are marked *